paint setup

So I don;t have a workstation, and everytime I paint I need to set up from this

To this, then pack up again after I am done...

Color pre-mixing

One of the technique that i learned but not used. Main reserve was that i thought the paint would dry but it turns out it wont dry that quickly





Here i do my favorite set of color, skin tone.
Usually i just keep on adding lighter paint until it got light enough
here I added the right pix to the little pits on the plate
then added water to thin it out



The good thing is that i can go back down the shading,


the result:

The Blue team...

For more on these mini...
From left to right:

Blue Orchid Assassin [Reaper]
http://www.reapermini.com/forum/index.php?/topic/42929-blue-orchid-assassin-reaper/page__p__600129__fromsearch__1&#entry600129

Barbarian, Reaper
http://51-cent.blogspot.com/2011/06/barbarian-now-with-better-gaze.html

Mason Thornwarden [Reaper]
http://51-cent.blogspot.com/2011/09/mason-thornwarden-reaper.html

Cassie, Gnome Wizard [Reaper]
http://51-cent.blogspot.com/2011/07/that-way-cassie.html

Better picture of the Time Witch (Freebooter)

Mr Hobby Surfacer (part 1)

Well finally I give in and started using spray cans, I know going this way will eventually leads me to using spray guns...

This surfacer is definitely a time safer, usually priming a mini took me an hour or so, with this it only took me minutesthe finish is a bit 'slippery' but still workable, compared to foundation paint + wash mix as prime

we'd see how it goes from here, I did something stupid with this (I thined my flesh foundation with wash)